Components for high performance

Ceramics Expo Ohio 08_2022

All articles


COMPOSITES EUROPE 2015 will once again bring leading companies and research institutes to its two special areas, the “Product Demonstration...
September 21, 2015


The world-­first ceramics EXPO USA was held in Cleveland 28–30 April 2015.
September 21, 2015

Destination Orlando 2016: AHR Expo – the World’s Largest HVACR Marketplace

The AHR Expo brings the entire HVACR in­dustry together under one roof to see the lat­est products and technology, learn...
September 21, 2015

Additive Manufacturing

The German Ceramic Society (DKG) will organize a symposium on ”Additive Manu­acturing – Process Engineering and Ap­plication in Ceramics” at...
September 21, 2015

SGl Carbon SE: Agreement on the Sale of the Aerostructures Business of HITCO

SGL Group/DE concluded in July 2015 an agreement with Toronto-­listed Avcorp Industries Inc./CA on the sale of the sub­sidiary HITCO’s...
September 21, 2015

High Performance Drive in a Small Package from maxon

The EC 4 brushless DC motor is maxon motor’s ultra-­compact solution to the mar­ket’s needs.
September 21, 2015

maxon motor Increased Revenues in 2014

After two years of stagnation, the maxon motor group/CH increased its revenues by more than 5 % to CHF 378,6...
September 21, 2015

Laser-Arc Technology for Carbon Coatings

Fraunhofer iWS/DE engineers developed the Laser-ArcTM technology especially for the deposition of ta-­C coatings.
September 21, 2015

New Sintering Furnace Hall for CeramTec in Marktredwitz

With spades in hand, the construction work for a new sintering furnace hall in Marktredwitz/DE officially began on 20 May...
September 21, 2015

Dr Hadi Saleh Is CeramTec’s New COO

Dr Hadi Saleh was appointed to the Ex­ecutive Board on 1 July 2015.
September 21, 2015

OYAK Signed Agreement to Acquire Almatis

Almatis, the world’s leading supplier of premium alumina for the refrac­tory, ceramic and polishing industries, an­nounced on 14 July 2015...
September 21, 2015

CeramTec Invests in Specialist for Precision Casting

CeramTec/DE has acquired DAI Ceramics Inc. of Willoughby, Ohio/US.
September 21, 2015

Intrinsic® Large-Size 3D-Printed Ceramic Components

A unique innovation was presented by Schunk Ingenieurkeramik/DE at THERMPROCESS 2015 in Dusseldorf/DE.
September 21, 2015

President Hollande Visited Limoges

On 28 May 2015, the French President François Hollande came to Limoges to sign the contract between the région Limousin...
September 21, 2015

Light-Flash Apparatus for Determining Thermal Diffusivity and Conductivity up to 1500 °C

The flash method is a precise, reliable and efficient method for determining the thermophysical properties of a variety of materials.
September 21, 2015

ceramitec 2015 – Iran Day

ceramitec is the international key trade show for the entire ceramics industry, from classic ceramics and raw materials through powder...
September 21, 2015

Fraunhofer HTL Centre for High-Temperature Materials and Design: Inauguration of New Research Facility

On 28 July 2015, the Fraunhofer HTL Centre for High-Temperature Materials and Design celebrated the inauguration of a new research...
September 21, 2015

Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen University e.V. (IAPK)

IAPK/DE, the new network partner of CERAMIC APPLICATIONS, is also in process to set-up a permanent exhibition for all partners...
September 9, 2015

FGK – Research, Development, Testing and Consultancy in the Field of Inorganic Materials, Glass and Ceramics

FGK (Forschungsinstitut für Anorganische Werkstoffe – Glas/Keramik – GmbH/DE), the new network partner of CERAMIC APPLICATIONS, is also in process...
September 9, 2015

Additive Manufacturing versus CIM, a Business Case

The need for small parts shaped in zirconia or alumina oxide isn’t new. Before, many shaping methods such as pressing...
September 9, 2015

Answers to Demands – Fitting Binder Systems for Growing CIM Requirements

INMATEC Technologies GmbH is a well known producer of ceramic feedstocks for Ceramic Injection Moulding (CIM). Founded in 1998 the...
September 9, 2015

Oxide Ceramic Matrix Composites – Manufacturing, Machining, Properties and Industrial Applications

Oxide ceramic matrix composites (O-CMC) combine high temperature stability, low density, high strength and good corrosion resistance with a damage-tolerant...
September 9, 2015

Novel Functional Structures and Structural Combinations by Additive Manufacturing

Additive manufacturing methods open the door to a completely new freedom in design. This is due to the fact that...
September 9, 2015

Technology Transfer to Russia – a Win-Win Situation

Objective of the project was to realize a production line for ceramic hip prostheses in Russia within three years. Whether...
September 9, 2015

Ceramic Components for Pumps and Valves from Rauschert

Technical ceramics are good solution for demanding pump and valve applications where conventional materials fail. Related to the individual application...
September 9, 2015

Perfect Pore Depth for Various Applications

For most of the ceramic manufacturers, a pore is a flaw that has to be avoided. Very few of them...
September 9, 2015

OXIDKERAMIK J. Cardenas GmbH: High-Performance Ceramic Materials from Germany

Extremely hard, superbly corrosion resistant, exceedingly wear and temperature resistant – these are just some of the properties of technical...
September 9, 2015

Applications for Alumina in the Automotive Market

Alumina, due to its powerful physical, thermal and electrical properties is by far the most used and cost-effective ceramic material...
September 9, 2015

General Advancements in Zirconia Technology

Zircoa’s approach to product, material development and applicationsupport will be described using an example of high performancemilling media tailored to...
September 5, 2015


Phone: +49 7221 502 200