All articles
maxon motor Increased Revenues in 2014
After two years of stagnation, the maxon motor group/CH increased its revenues by more than 5 % to CHF 378,6...
September 21, 2015
Laser-Arc Technology for Carbon Coatings
Fraunhofer iWS/DE engineers developed the Laser-ArcTM technology especially for the deposition of ta-C coatings.
September 21, 2015
New Sintering Furnace Hall for CeramTec in Marktredwitz
With spades in hand, the construction work for a new sintering furnace hall in Marktredwitz/DE officially began on 20 May...
September 21, 2015
Dr Hadi Saleh Is CeramTec’s New COO
Dr Hadi Saleh was appointed to the Executive Board on 1 July 2015.
September 21, 2015
OYAK Signed Agreement to Acquire Almatis
Almatis, the world’s leading supplier of premium alumina for the refractory, ceramic and polishing industries, announced on 14 July 2015...
September 21, 2015
CeramTec Invests in Specialist for Precision Casting
CeramTec/DE has acquired DAI Ceramics Inc. of Willoughby, Ohio/US.
September 21, 2015
Intrinsic® Large-Size 3D-Printed Ceramic Components
A unique innovation was presented by Schunk Ingenieurkeramik/DE at THERMPROCESS 2015 in Dusseldorf/DE.
September 21, 2015
President Hollande Visited Limoges
On 28 May 2015, the French President François Hollande came to Limoges to sign the contract between the région Limousin...
September 21, 2015
Light-Flash Apparatus for Determining Thermal Diffusivity and Conductivity up to 1500 °C
The flash method is a precise, reliable and efficient method for determining the thermophysical properties of a variety of materials.
September 21, 2015
ceramitec 2015 – Iran Day
ceramitec is the international key trade show for the entire ceramics industry, from classic ceramics and raw materials through powder...
September 21, 2015
Fraunhofer HTL Centre for High-Temperature Materials and Design: Inauguration of New Research Facility
On 28 July 2015, the Fraunhofer HTL Centre for High-Temperature Materials and Design celebrated the inauguration of a new research...
September 21, 2015
Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen University e.V. (IAPK)
IAPK/DE, the new network partner of CERAMIC APPLICATIONS, is also in process to set-up a permanent exhibition for all partners...
September 9, 2015
FGK – Research, Development, Testing and Consultancy in the Field of Inorganic Materials, Glass and Ceramics
FGK (Forschungsinstitut für Anorganische Werkstoffe – Glas/Keramik – GmbH/DE), the new network partner of CERAMIC APPLICATIONS, is also in process...
September 9, 2015
Additive Manufacturing versus CIM, a Business Case
The need for small parts shaped in zirconia or alumina oxide isn’t new. Before, many shaping methods such as pressing...
September 9, 2015
Answers to Demands – Fitting Binder Systems for Growing CIM Requirements
INMATEC Technologies GmbH is a well known producer of ceramic feedstocks for Ceramic Injection Moulding (CIM). Founded in 1998 the...
September 9, 2015
Oxide Ceramic Matrix Composites – Manufacturing, Machining, Properties and Industrial Applications
Oxide ceramic matrix composites (O-CMC) combine high temperature stability, low density, high strength and good corrosion resistance with a damage-tolerant...
September 9, 2015
Novel Functional Structures and Structural Combinations by Additive Manufacturing
Additive manufacturing methods open the door to a completely new freedom in design. This is due to the fact that...
September 9, 2015
Technology Transfer to Russia – a Win-Win Situation
Objective of the project was to realize a production line for ceramic hip prostheses in Russia within three years. Whether...
September 9, 2015
Ceramic Components for Pumps and Valves from Rauschert
Technical ceramics are good solution for demanding pump and valve applications where conventional materials fail. Related to the individual application...
September 9, 2015
Perfect Pore Depth for Various Applications
For most of the ceramic manufacturers, a pore is a flaw that has to be avoided. Very few of them...
September 9, 2015
OXIDKERAMIK J. Cardenas GmbH: High-Performance Ceramic Materials from Germany
Extremely hard, superbly corrosion resistant, exceedingly wear and temperature resistant – these are just some of the properties of technical...
September 9, 2015
Applications for Alumina in the Automotive Market
Alumina, due to its powerful physical, thermal and electrical properties is by far the most used and cost-effective ceramic material...
September 9, 2015
150 Years of Haldenwanger – Specialist Manufacturer of Technical Ceramics since 1865
PDF download
September 9, 2015
General Advancements in Zirconia Technology
Zircoa’s approach to product, material development and applicationsupport will be described using an example of high performancemilling media tailored to...
September 5, 2015
Quality is Top Priority: Ultrasound Piezo Elements in Medical Technology
Ultrasound, which is sound above the human hearing limit of approximately16 kHz, is applied in numerous ways in medical engineering...
September 5, 2015
SPK® Seminar Program Metal Machining
CeramTec will be hosting two seminars on milling and hard turning with SPK® cutting materials and tool systems in October...
August 4, 2015
Nabaltec AG: Financial Year 2014 and Outlook for Results in Q1/2015
Nabaltec published end of April its 2014 consolidated financial statements. Revenues remained stable at a high level, climbing by 7,8 %...
July 24, 2015
ACerS Forms New Manufacturing Division
The American Ceramic Society – ACerS has formed a Manufacturing Division to address the needs of members and prospective members...
June 25, 2015
ceramitec 2015: International Participation Higher than ever Before
Nine months before opening its gates, ceramitec is on the road to success. Already at this stage, it is definite...
June 25, 2015
ESK Renamed to 3M Technical Ceramics, a Branch of 3M Deutschland GmbH
ESK was member of Ceradyne Inc., which has been aquired by 3M in 2012. ESK is now one of 18...
June 23, 2015