Components for high performance

All articles


Ground-Breaking Ceremony for the New Production Hall

To always be at the forefront with future-oriented ideas, novel technologies and cutting edge equipment - this describes the motivation...
November 2, 2021

Elkem Announces Expansion to Support Demand Growth for Specialty Silicones in EMEA and the Americas

Elkem/NO, a global leader in silicon-based advanced materials, announces a strategic investment plan to unlock new specialty silicones supply for...
November 2, 2021

Engineered Materials for High-End Applications

Treibacher Industrie AG is a leading Austrian chemical and metallurgical enterprise. It was founded in 1898 by the famous scientist...
November 2, 2021

Made-to-Measure Extrusion – the ECT-KEMA Extrusion Laboratory

For the cost-efficient production of high-quality extruded products, it is now essential to determine in advance precise information on the...
November 2, 2021

Empower Digital Mass Production with the CeraFab System

Lithoz’s CeraFab System ceramic 3D printers make the digitalization of your manufacturing workflow a reality today. By enabling the integration...
November 2, 2021

Data-Based Process Development and Control in Multi-Material Jetting Technology

Data-driven methods such as Data Mining (DM) and Machine Learning (ML) are contributing to the development and optimisation of new...
May 6, 2021

Making Binder Jetting Really Work for Technical Ceramics – Additive Manufacturing of Technical Ceramics*

As an alternative shaping method to the traditionally used processes, Additive Manufacturing (AM) can produce economical ceramic components in small...
May 6, 2021

Paving the Way for All-Solid-State Batteries: Ceramic Materials, Components and Cells for Electrochemical Storage

Energy storage is an essential element of the energy transition. Besides Li-ion, all-solid state lithium and sodium batteries attract a...
May 6, 2021

Silicon-Nitride Speciality Materials for Product and Process Innovation in Semiconductor and Analysis Technology*

Many areas of technology would be unthinkable today without highperformance ceramics on the basis of silicon nitride for the optimisation...
May 6, 2021

Ceramic Coatings by Thermal Spraying – a Comparison between High Velocity Oxy-Fuel and Atmospheric Plasma Spraying

Metals, plastics and ceramics each have particular properties, which make them suitable for different applications. Density, thermal and electrical conductivity,...
May 6, 2021

Water-Based Tape Casting Process: An Environmentally Friendly Process for Mass Production of Ceramic Substrates for Electronic Applications*

SEDAL has been involved for the last years in the optimisation of the water-based tape casting process to produce high-quality...
May 6, 2021

Sustainable, Natural Pore Formers and Process Additives for the Ceramic Industry*

Nature offers an almost inexhaustible reservoir of usable functions that have always been present in the plant world. Each plant...
May 6, 2021

Manufacture the Future: Your Partner from First 3D-Printed Ceramic Part to Industrial Production

As the global leader in the field of industrial ceramic 3D printing, Lithoz has been providing technology for innovators to...
May 6, 2021

Perfect Surface Finishing Gives Ceramic Axles a Long Service Life

Ceramic pins are now used in areas where metals were previously used. Just a few decades ago, applications that are...
May 6, 2021

Sophisticated Filters Rotate!

The separation technique dynamic cross-flow filtration is enjoying ever greater recognition in the field of membrane filtration. This article provides...
May 6, 2021

Almatis: Forward Strategy in Times of Corona with New Products and Reliable Services

Like many other businesses, the raw material sector is challenged by COVID-19. Reliable supply is one central theme, which is...
May 6, 2021

Fabrication of Short-Fibre Reinforced SiCN by Injection Moulding of Pre-Ceramic Polymers

Pre-ceramic polymers were used as organic vehicle in this study forming a ceramic matrix after pyrolysis. Carbon short-fibres were chosen...
March 30, 2021

All under One Roof – Reconstruction of the CerAMfacturing Laboratories of Ceramic Components Completed

Fraunhofer IKTS/DE reports the completion of the reconstruction work of the CerAMfacturing Laboratories for Additive Manufacturing (AM) of ceramic, glass...
March 6, 2021

Oxide Ceramic Fibre Development at Fraunhofer Center HTL

Oxide ceramic fibres are required for reinforcement of metal matrix and ceramic matrix composites – especially in high temperature applications....
March 6, 2021

Effective Treatment of Problematic Process and Wastewater with Ceramic Nano-Filtration Membranes

As part of the production changeover from the former manufacture of electrical porcelain and other silicate ceramics to the production...
March 6, 2021

Ceramic Components Made by Textile Technology from Inorganic Fibres

Textiles are no longer available just in their customary forms, but also with special functional properties and in combination with...
March 6, 2021

SwissCeraMill Ceramic Mill Cutter – Revolution in Aluminium Milling

In a record time of just six months, the partners A&L Tool AG/CH and BSQ TECH GmbH/CH have launched the...
March 6, 2021

New Solutions for Machining Hard Brittle Materials

With the application of state-of-the-art laser technology, 6C Tools AG, a company based in Switzerland, fabricates tools from solid PCD...
March 6, 2021

40 Years of VOGT

For 40 years, VOGT GmbH has been on hand to support diverse user segments as a competent partner in the...
March 6, 2021

Elkem Changed Corporate Structure to Accelerate Specialisation

Last summer, Elkem/NO made changes to the corporate structure and top management. Elkem has now three business div isions: Silicones,...
March 6, 2021

10 Years of Lithoz: Manufacturing the Future

Lithoz was founded in 2011 as spin-off of Vienna University of Technology/AT and specialises in the development and pro duction...
March 6, 2021

Ceramaret’s Growth Strategy

Ceramaret, a leader in the design and manufacture of high-precision components made of advanced ceramics (oxide and non-oxide ceramics, synthetic...
March 6, 2021

INMATEC Technologies GmbH Increases Feedstock Production

Since 1998, feedstocks for CIM (Ceramic Injection Moulding) have been developed and produced at INMATEC Technologies GmbH in Rheinbach/DE. For...
March 6, 2021

3DCERAM Sinto: Turnkey Provider for Ceramic Additive Manufacturing

3DCERAM Sinto, founded in 2001 by Christophe Chaput and Richard Gaignon, is a process provider (machine, mix and services) in...
March 6, 2021

1st Announcement: ceramitec Conference and Exhibition will Already be in 2021

A lot of technologically strong and innovative companies expressed, even after the postponement of the world´s leading fair ceramitec to...
November 10, 2020

Service

Phone: +49 7221 502 200


E-mail: info@goeller-verlag.de